Last Updated on August 13, 2024 by Dogs Vets
Wahl clippers are popular for both professional groomers and pet owners due to their precision and reliability. However, to maintain optimal performance, it’s crucial to know how to adjust, clean, and oil your clippers.
This guide will walk you through the steps to align, oil, and troubleshoot your Wahl clippers, ensuring they stay in top condition.
How to Align a Wahl 2-Hole Clipper Blade
Properly aligning the blades of your Wahl clippers is essential for a smooth and efficient cut. Follow these steps:
- Loosen the Screws: Slightly loosen both blade screws just enough to allow the blade to slide.
- Align the Blades: Align the lower blade with the upper blade. Ensure that the far-left tooth of the upper blade sits on the first small tooth of the lower blade.
- Tighten the Screws: Once the blade is aligned, securely tighten the screws.
- Test Your Clippers: Plug in your clippers and test them to ensure proper alignment and smooth operation.
How Often Should You Oil Your Wahl Clippers?
Regular oiling is essential to extend the life of your Wahl clippers and maintain their cutting efficiency. Here’s what you need to know:
- For Consumer Products: Apply one or two drops of Wahl Clipper Oil to the blades about once a month.
- For Professional Products: Oil the blades daily, or after every use if you run a grooming business.
Just as a car requires regular lubrication, so do clippers, depending on their usage frequency.
Why Lubricate Your Dog Clippers?
Lubrication reduces friction between the moving parts of your clippers, preventing them from overheating. Unlubricated clippers can cause discomfort to your pet and may lead to equipment damage. Whether you’re a professional groomer or grooming your dog at home, make it a habit to oil your clippers regularly.
What to Do When Your Dog Clippers Stop Cutting or Start Pulling Fur
If your clippers suddenly stop cutting efficiently or start pulling at your dog’s fur, follow these steps:
- Disassemble the Blade: Remove the two screws on the blade base (be careful not to lose them!).
- Clean the Clippers: Use a small brush to clean the trimmers thoroughly.
- Grease the Blade Groove: Apply a small amount of grease to the blade groove before reassembling the parts.
- Reassemble and Align: Place the blade upside down on a flat surface to level it before tightening the screws.
- Oil the Blade: Apply two to three drops of oil along the visible part of the blade before each use.
This process should restore your clippers’ cutting ability.
Top Tips for Trimming Your Dog at Home
- Regular Brushing: Gently brush your dog’s coat to prevent tangles.
- Careful Trimming: Be cautious when trimming to avoid cutting your dog’s skin.
- Skin Check: Always check your dog’s skin for any irregularities during grooming.
- Training: Train your dog to enjoy grooming sessions for a stress-free experience.
- Nail Trimming: Safely trim your dog’s nails to avoid injury.
- Ear Checks: Regularly check your dog’s ears for any signs of infection.
- Bathing: Avoid washing your dog too often to prevent skin dryness.
Do All Dog Clippers Get Hot?
Yes, all clippers can get hot during use, except for a few models like the Ultra-Edge Andis, which tends to stay cooler. It’s essential to monitor the temperature of your clippers to avoid burning your pet. Consider using a Kool Lube spray to keep them cool.
How to Cool a Dog Clipper
Here’s a simple trick to keep your dog clippers cool:
- Turn Off the Clipper: Periodically turn off the clipper in the middle of the trim.
- Check the Temperature: Touch the blades to see if they’ve become too hot.
- Cool Down: If they are hot, change the blades or place them on a metal surface to cool down before continuing.
Why Aren’t My Clippers Working?
If your clippers stop working, common issues might include:
- Clogged or Damaged Blades: Clean and inspect the blades.
- Faulty Cord: Check for any damage to the cord.
- Dead Battery: Recharge the battery or replace it if necessary.
Why Isn’t My Wahl Clipper Working?
If your Wahl clipper won’t turn on, especially if it hasn’t been used recently, the battery may be dead. Plug the clipper into the charger to see if it starts working. If it stops charging, it might be time for a battery replacement.
How Often Should You Oil Your Clippers?
For optimal performance:
- Clippers: Oil after every use.
- Trimmers: Oil once a day or after several uses.
- Hygienic Spray: Use after cleaning to maintain cleanliness.
How to Reset Lister Clippers
If your Lister Star reset button pops out, push it all the way back in using the small brush that came with the clippers (or another tool), until you hear a click. This will reset the clippers.
Can I Use Human Clippers for My Dog?
It’s generally not recommended to use human clippers for trimming dogs due to the increased risk of injury. The motor in human clippers isn’t designed for prolonged use, and the noise and vibration may startle your pet. Pet clippers are specifically designed for safe and efficient grooming.
Does It Hurt Dogs to Cut Nails Quickly?
Cutting a dog’s nails too short can be painful and cause bleeding, as it may damage the nerves and blood vessels in the nail, known as the “quick.” Always trim carefully to avoid hurting your dog.
What to Do When Clippers Stop Working
Clippers often need to be cleaned and oiled after a certain amount of use. If your clippers stop working:
- Clean the Blades: Remove hair and debris from the blades.
- Lubricate: Apply oil to the blades to reduce friction.
- Inspect and Replace: If needed, replace the blades for better performance.
Fact check…
We hope you enjoyed this article… What are your thoughts about this post?
Рleаse let us knоw yоur thоughts in the соmments seсtiоn. Feel free to share with us in the comments section below.
